通販検索/いつも気楽に

WII TECH次世代AK47対応アルミガスチューブ(OriginalStyle) [WII-01411](JAN：2000000098937)

This 6061 aluminium gas tube is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits Marui Next Gen AEG: AK47 and AKS47 only. Material：CNC 6061 Aluminium Weight： 58 g All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。

WII TECH強化ピストン(Full Teeth)(東京マルイ Ver.2/3 BOX用) [WII-01121](JAN：2000000072128)

WII TECHベアリングスプリングガイド(東京マルイ スタンダードM4用) [WII-01201](JAN：2000000072104)

WII TECHアルミハンドストップ スリム(M-LOK/KEYMOD両対応) [WII-05042](JAN：2000000098906)

This aluminium hand stop is made by precision CNC machines. It fits both KeyMod and M-LOK system, and it has matt black hardcoat-anodized finishing. Material：CNC 6063 Aluminium Weight：12 g All products are made for airsoft only. They are not made for real steel firearms ※画像は取付イメージです

WII TECH次世代SCAR-L/H対応 ベアリングスプリングガイド [WII-01330](JAN：2000000091105)

This enhanced bearing spring guide fits Scar H & L (Marui) Next Gen. AEG. All products are made for airsoft only. They are not made for real steel firearms. ※取り付けに加工・調整が必要な場合があります。

WII TECHマルイAKM用M4系ストックコンバージョンキット(DPMSストック付) [WII-02390](JAN：2000000095431)

マルイAKM GBBをM4タイプストックへ変換するコンバージョンキットです。 ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。 ※画像は取付イメージです。AKM本体は別途ご用意ください。

WII TECH20mmレール用Zenitco RK-4タイプアルミフォアグリップ [WII-02385](JAN：2000000095448)

This aluminium front grip is made by precision CNC machines, and has matt black hardcoat-anodized finishing. It is installed on any handguard with a lower Picatinny rail. Inside the grip is a sealed container. Material : CNC 6061 Aluminium Weight : 112 g All products are made for airsoft only. They are not made for real steel firearms.

WII TECHカットオフレバー(東京マルイ Ver.2 BOX用) [WII-01070](JAN：2000000072111)

WII TECHマルイAKM用B-10U(2021Ver) タイプレイルロアハンドガード [WII-02349](JAN：2000000091075)

This aluminium rail handguard is 2021 version, it is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AKM(T.Marui GBB) only. The handguard has a Picatinny rail on the bottom and two Basis rails on sides. Also it forms one additional Basis rail in the rear part on the bottom. All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。 ※画像は取付イメージです。AKM本体は別途ご用意ください。

WII TECHベアリングピストンヘッド(東京マルイ 次世代M4用) [WII-01174](JAN：2000000072081)

WII TECHアルミフロントサイト(集光/ハイサイト) マルイグロック対応 [WII-03441](JAN：2000000088075)

This 6063 aluminium sight is made by precision CNC machines. It fits Glock series (T.Marui). This high sight is made for professional shooter and competition needs because it is:1) AFD class (realistic appearance);2) Light weight construction;3) 3 colours of fiber optic are included;4) Matt black hardcoat-anodized finishing. ※写真とは、色・質感等が異なる場合があります。 ※組込時に加工・調整が必要な場合があります。

WII TECHWII Zenitcoロアハンドガード用B-19N Railアッパーハンドガード2021ver [WII-01419](JAN：2000000102306)

This B-19N upper rail handguard is 2021 version. It is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK47 & AKS47 Type-3 (Marui Next Gen) AEG only. The upper handguard must be installed above our AK47 & AKS47 aluminium gas tube (i.e. item No.1411) and is mounted on our lower handguards: B-10M and B-10U, by four screws and the upper handguard retainer (i.e, in the kit). It forms a Picatinny rail above the gas tube, and it does not close the line of iron sight. Material：CNC 6061 Aluminium Weight：60 g All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。

WII TECHマルイAKM用B-10M(2021Ver) タイプレイルロアハンドガード [WII-02348](JAN：2000000091068)

This B-10M aluminium rail handguard is 2021 version, it is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AKM(T.Marui GBB) only. The handguard has Picatinny rails on three sides. Also if forms one additional Basis rail in the rear part on the bottom. All products are made for airsoft only. They are not made for real steel firearms. Material：CNC 6061 Aluminium Weight：162 g ※個体差により加工・調整が必要な場合があります。

WII TECH強化ハイスピードピストン(Half Teeth)(東京マルイ Ver.2/3 BOX用) [WII-01124](JAN：2000000072098)

WII TECH次世代AK47対応TDI Z70タイプロアハンドガード [WII-01421](JAN：2000000102320)

※個体差により加工・調整が必要な場合があります。

WII TECH次世代MP5SD6用6.03精密インナーバレル(329mm) [WII-01363](JAN：2000000102276)

This brass 329mm long and Ø6.03mm internal diameter high precision inner barrel fits MP5 SD (Marui Next Gen) with Version 2 Hop-up Bucking. It increases shooting accuracy and range. Please see the photo regarding the shape of the Version 2 Hop-up area at inner barrel. This barrel fits Version 2 Hop-up bucking but does NOT fit Version 1 Hop-up Bucking. All products are for airsoft only. They are not made for real steel firearms. Material：Brass Weight：77g ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。

WII TECHホップアップラバー用押さえ金 [WII-01110](JAN：2000000072074)

WII TECH次世代MP5SD6用B&T Tri-Railタイプレールマウント [WII-01361](JAN：2000000102283)

This Tri-Rail Mount is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits MP5 SD6 (Marui Next Gen) AEG. The mount has 3 NATO Picatinny rails and the inside diameter is 40mm. All products are for airsoft only. They are not made for real steel firearms. Material：CNC 6063 Aluminium Weight：66 g ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。 ※画像は取付イメージです。次世代MP5SD6本体は別途ご用意ください。

WII TECH次世代AK47用Zenitco B-10Uタイプレイルロアハンドガード2021ver [WII-01416](JAN：2000000102313)

This aluminium rail handguard is 2021 version, it is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK47 & AKS47 Type-3 (Marui Next Gen) AEG only. The handguard has a Picatinny rail on the bottom and two Basis rails on sides. Also it forms one additional Basis rail in the rear part on the bottom. Material：CNC 6061 Aluminium Weight：115 g All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。

WII TECH次世代AK47用MIDWESTタイプレールガスチューブ [WII-01412](JAN：2000000102290)

This 6061 aluminium Railed Gas Tube and securing nut are made by precision CNC machines. It fits AK47 & AKS47 Type-3 (Marui Next Gen) AEG only. The gas tube has mil-spec top rail with matt black hardcoat-anodized finishing. Material：CNC 6061 Aluminium Weight： 115 g All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。

WII TECH次世代AK102対応 Zenitco RP-1タイプチャージングハンドル [WII-01381](JAN：2000000098630)

This 6061 aluminium charging handle is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK102 (Marui Next Gen) AEG only. No modification is required for installation. All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。

WII TECH次世代AK102用 Zenitco DTK-2タイプマズルブレーキ [WII-01398](JAN：2000000098623)

This muzzle blast is made by precision CNC machines. It is made of 6063 aluminium with M24 thread, and has matt black hardcoat-anodized finishing. Material : CNC 6063 Aluminium Weight : 38 g All products are made for airsoft only. They are not made for real steel firearms.

WII TECH次世代AK102用 Zenitco DTK-1タイプマズルブレーキ [WII-01397](JAN：2000000098616)

This muzzle blast is made by precision CNC machines. It is made of 6063 aluminium with M24 thread, and has matt black hardcoat-anodized finishing. Material : CNC 6063 Aluminium Weight : 46 g All products are made for airsoft only. They are not made for real steel firearms.

WII TECH次世代AK102対応 CNC6061アルミマグウェル [WII-01396](JAN：2000000098609)

This 6061 aluminium Magwell is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK102 (Marui Next Gen) AEG for easier to insert magazine and faster loading. No modification is required for installation. Material：CNC 6061 Aluminium Weight： 46 g All products are made for airsoft only. They are not made for real steel firearms.

WII TECH次世代MP5A5用6.03精密インナーバレルV2(228mm) [WII-01359A](JAN：2000000102269)

This brass 228mm long and Ø6.03mm internal diameter high precision inner barrel fits MP5 (Marui Next Gen) with Version 2 Hop-up Bucking. It increases shooting accuracy and range. Please see the photo regarding the shape of the Version 2 Hop-up area at inner barrel. This barrel fits Version 2 Hop-up bucking but does NOT fit Version 1 Hop-up Bucking. All products are for airsoft only. They are not made for real steel firearms. Material：Brass Weight：54g ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。

WII TECH次世代AK102対応 アルミガスチューブ [WII-01382](JAN：2000000098593)

This 6061 aluminium gas tube is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK102 (Marui Next Gen) AEG only. Material：CNC 6061 Aluminium Weight： 62 g All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。

WII TECH次世代AK102対応 B-10U(2021) タイプレイルロアハンドガード [WII-01384](JAN：2000000098586)

This aluminium rail handguard is 2021 version, it is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK102 (Marui Next Gen) AEG only. The handguard has a Picatinny rail on the bottom and two Basis rails on sides. Also it forms one additional Basis rail in the rear part on the bottom. Material：CNC 6061 Aluminium Weight：115 g All products are made for airsoft only. They are not made for real steel firearms. ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。

WII TECH次世代AK47対応CNC6061アルミマグウェル [WII-01430](JAN：2000000100203)

This 6061 aluminium Magwell is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK47 & AKS47 Type-3 (Marui Next Gen) AEG for easier to insert magazine and faster loading. No modification is required for installation. Material：CNC 6061 Aluminium Weight： 50 g All products are made for airsoft only. They are not made for real steel firearms. ※画像は取付イメージです。エアガン本体は別途ご用意ください。 ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。

WII TECH次世代AK102対応 B-30U(2021) タイプレイルロアハンドガード [WII-01391](JAN：2000000098579)

This aluminium rail handguard is 2021 version, it is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK102 (Marui Next Gen) AEG only. The handguard has a Picatinny rail on the bottom and a small Picatinny rail on the right-hand side, and two Basis rails on sides. Also it forms one additional Basis rail in the rear part on the bottom. All products are made for airsoft only. They are not made for real steel firearms. Material：CNC 6061 Aluminium Weight：164 g ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。

WII TECH次世代AK102用 B-31L(2022Ver) タイプアッパーハンドガード [WII-01393](JAN：2000000098562)

This aluminium upper handguard is 2022 version, it is made by precision CNC machines and has matt black hardcoat-anodized finishing. It fits AK102 (Marui Next Gen) AEG only. The upper handguard must be installed above our AK102 aluminium gas tube (i.e. item No.1382) and mounted on our lower handguard: B-30, B-30U. The handguard has short Picatinny rail on top, and has steel nuts and screws for installation. All products are made for airsoft only. They are not made for real steel firearms. Material：CNC 6061 Aluminium Weight：102 g ※別途ガスチューブ(WII-01382)が必要です。 ※個体差により加工・調整が必要な場合があります。 ※画像とは色・質感が異なる場合があります。