通販検索/いつも気楽に

【正規品/新品保障】人気のバイク用品がお買得！DYNATEK / ダイナテック-HARLEY DYNA PROGRAM KIT 2000-I | DIPK-1

製品コード: DIPK-1Completely self-contained so entire unit hides under the cam cover for a clean look on custom bikes Single-fire operation down to zero rpm for easier cranking and kicking Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads Ten advance curves cover a broad range of engine builds and riding styles Engine over-rev protection adjustable from 6000 to 7500 rpm Adjustable timing retard for nitrous and turbo applications VOES indicator lets you monitor VOES switch at a glance Built-in tach driver can be used to activate shift lights auto-shifters and other accessories Easy static timing with built-in timing indicator Intelligent over-current/short-circuit protection Active dwell control Over-voltage protected against momentary spikes Data recording includes total engine hours time wide-open throttle longest time operating at wide-open throttle max rpm seconds near rev limit and number of engine starts PC programmability makes possible an eight-point fully definable wide-open throttle curve and a fully definable part throttle curve rev limit programmable in 50 rpm steps programmable dead-cranking revs 0-5 rear cylinder offset total of +/- 10° programmable rev limiter security lock out (pin # activated) single or dual fire Programming and downloading data and graphs from module requires proper programming kit (includes CD cables and instructions) Pigtail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves rev limits dead revs or rear cylinder off-set timing; connector remains on bike Made in the U.S.A. Not for fuel-injected models Programming kit is not necessary to use all selectable functions of the current ignition.

【正規品/新品保障】人気のバイク用品がお買得！DYNATEK / ダイナテック-HARLEY DYNA 2000I IGN-TWIN FIRE | D2KI-5P

製品コード: D2KI-5PCompletely self-contained so entire unit hides under the cam cover for a clean look on custom bikes Single-fire operation down to zero rpm for easier cranking and kicking Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads Ten advance curves cover a broad range of engine builds and riding styles Engine over-rev protection adjustable from 6000 to 7500 rpm Adjustable timing retard for nitrous and turbo applications VOES indicator lets you monitor VOES switch at a glance Built-in tach driver can be used to activate shift lights auto-shifters and other accessories Easy static timing with built-in timing indicator Intelligent over-current/short-circuit protection Active dwell control Over-voltage protected against momentary spikes Data recording includes total engine hours time wide-open throttle longest time operating at wide-open throttle max rpm seconds near rev limit and number of engine starts PC programmability makes possible an eight-point fully definable wide-open throttle curve and a fully definable part throttle curve rev limit programmable in 50 rpm steps programmable dead-cranking revs 0-5 rear cylinder offset total of +/- 10° programmable rev limiter security lock out (pin # activated) single or dual fire Programming and downloading data and graphs from module requires proper programming kit (includes CD cables and instructions) Pigtail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves rev limits dead revs or rear cylinder off-set timing; connector remains on bike Made in the U.S.A. Not for fuel-injected models Programming kit is not necessary to use all selectable functions of the current ignition.

【正規品/新品保障】人気のバイク用品がお買得！DYNATEK / ダイナテック-HARLEY DYNA 2000I IGN-DUAL PL-SF | D2KI-3P

製品コード: D2KI-3PCompletely self-contained so entire unit hides under the cam cover for a clean look on custom bikes Single-fire operation down to zero rpm for easier cranking and kicking Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads Ten advance curves cover a broad range of engine builds and riding styles Engine over-rev protection adjustable from 6000 to 7500 rpm Adjustable timing retard for nitrous and turbo applications VOES indicator lets you monitor VOES switch at a glance Built-in tach driver can be used to activate shift lights auto-shifters and other accessories Easy static timing with built-in timing indicator Intelligent over-current/short-circuit protection Active dwell control Over-voltage protected against momentary spikes Data recording includes total engine hours time wide-open throttle longest time operating at wide-open throttle max rpm seconds near rev limit and number of engine starts PC programmability makes possible an eight-point fully definable wide-open throttle curve and a fully definable part throttle curve rev limit programmable in 50 rpm steps programmable dead-cranking revs 0-5 rear cylinder offset total of +/- 10° programmable rev limiter security lock out (pin # activated) single or dual fire Programming and downloading data and graphs from module requires proper programming kit (includes CD cables and instructions) Pigtail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves rev limits dead revs or rear cylinder off-set timing; connector remains on bike Made in the U.S.A. Not for fuel-injected models Programming kit is not necessary to use all selectable functions of the current ignition.

【正規品/新品保障】人気のバイク用品がお買得！DYNATEK / ダイナテック-HARLEY DYNA 2000I イグニッション MODUL | D2KI-1P

製品コード: D2KI-1PCompletely self-contained so entire unit hides under the cam cover for a clean look on custom bikes Single-fire operation down to zero rpm for easier cranking and kicking Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads Ten advance curves cover a broad range of engine builds and riding styles Engine over-rev protection adjustable from 6000 to 7500 rpm Adjustable timing retard for nitrous and turbo applications VOES indicator lets you monitor VOES switch at a glance Built-in tach driver can be used to activate shift lights auto-shifters and other accessories Easy static timing with built-in timing indicator Intelligent over-current/short-circuit protection Active dwell control Over-voltage protected against momentary spikes Data recording includes total engine hours time wide-open throttle longest time operating at wide-open throttle max rpm seconds near rev limit and number of engine starts PC programmability makes possible an eight-point fully definable wide-open throttle curve and a fully definable part throttle curve rev limit programmable in 50 rpm steps programmable dead-cranking revs 0-5 rear cylinder offset total of +/- 10° programmable rev limiter security lock out (pin # activated) single or dual fire Programming and downloading data and graphs from module requires proper programming kit (includes CD cables and instructions) Pigtail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves rev limits dead revs or rear cylinder off-set timing; connector remains on bike Made in the U.S.A. Not for fuel-injected models Programming kit is not necessary to use all selectable functions of the current ignition.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 STAINLESS STEEL SLIP-ON Standard | M.KT.031.LXC

Article Number : M.KT.031.LXCNOTICE: EURO 4 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLEDBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 BLACK STAINLESS STEEL SLIP-ON Standard | M.KT.031.LXBC

Article Number : M.KT.031.LXBCNOTICE: EURO 4 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLEDBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 STAINLESS STEEL SLIP-ON Standard | M.HU.010.LXC

Article Number : M.HU.010.LXCEAN : 8051012204865NOTICE: EURO 5 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLEDBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 BLACK STAINLESS STEEL SLIP-ON Standard | M.HU.010.LXBC

Article Number : M.HU.010.LXBCEAN : 8051012204933NOTICE: EURO 5 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLEDBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 TITANIUM SLIP-ON Standard | M.HU.010.L4C

Article Number : M.HU.010.L4CEAN : 8051012204872NOTICE: EURO 5 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLEDBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of grade 1 Titanium features a 3k twill carbon end cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction. The exhaust is made of grade 1 Titanium features a 3k twill carbon end cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.. The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs. The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation. The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 STAINLESS STEEL SLIP-ON Standard | M.HO.035.SXC

Article Number : M.HO.035.SXCEAN : 8051012204704NOTICE: The bench test values refer to the silencer + racing header configuration. Noise level: 114 dbBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 TITANIUM SLIP-ON Standard | M.HO.035.S4C

Article Number : M.HO.035.S4CEAN : 8051012204711NOTICE: The bench test values refer to the silencer + racing header configuration. Noise level: 114 dbBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of grade 1 Titanium features a 3k twill carbon end cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of grade 1 Titanium features a 3k twill carbon end cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 STAINLESS STEEL SLIP-ON Standard | M.HO.034.SXC

Article Number : M.HO.034.SXCEAN : 8051012204735NOTICE: The bench test values refer to the silencer + racing header configuration. Noise level: 114 dbBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of AISI 304 stainless steel features a 3k twill carbon cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Mivv STR-1 TITANIUM SLIP-ON Standard | M.HO.034.S4C

Article Number : M.HO.034.S4CEAN : 8051012204742NOTICE: The bench test values refer to the silencer + racing header configuration. Noise level: 114 dbBuilt with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of grade 1 Titanium features a 3k twill carbon end cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.Built with the best possible layout to fit the available spaces on the bike the mivv STR-1 exhaust has been designed to ensure best performances reliability and weight reduction.The exhaust is made of grade 1 Titanium features a 3k twill carbon end cap and is equipped with a special DB-Killer optimized to reduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine can express its best over the entire range of engine revs. The bench tests also confirmed by track tests show excellent performance at both low and high revs.The STR-1 exhaust is equipped with latest generation sound-absorbing materials developed by our R&D department and complies with the increasingly stringent noise limits imposed by national and international regulations for off-road competitions. The sound-absorbing material is easily replaceable thanks to screws located in the front part of the exhaust that facilitate this operation.The Mivv STR-1 exhaust does not require remapping and was developed without making any changes to the electronics. It is interchangeable with the stock silencer.This product is suitable for use on track and closed courses only. It has been designed to fit a standard-equipped motorcycle as delivered by the parent company.

MIVVミヴ フルエキゾーストマフラー STR-1 ステンレスフルエキゾーストマフラーMIVV ミヴ STR-1 ステンレスフルエキゾーストマフラー 690 ENDURO R SMC KTM フルエキゾーストマフラー マフラー

■詳細説明Built with the best possible layout to fit the available spacesonthe bike，the mivv STR-1 exhaust has been designed to ensurebestperformances，reliability and weight reduction.The exhaust is made of AISI 304 stainless steel，features a 3ktwillcarbon cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine canexpressits best over the entire range of engine revs.The bench tests also confirmed by track tests showexcellentperformance at both low and high revs.The STR-1 exhaust is equipped with latest generationsound-absorbingmaterials，developed by our R＆D department，andcomplies with theincreasingly stringent noise limits imposed bynational andinternational regulations for off-roadcompetitions.The sound-absorbing material is easily replaceable thanks toscrewslocated in the front part of the exhaust that facilitatethisoperation.The Mivv STR-1 exhaust does not require remapping and wasdevelopedwithout making any changes to the electronics.It is interchangeable with the stock silencer.■注意点※EURO 5 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLED.※NOT COMPATIBLE WITH EURO5＋ VEHICLES EQUIPPED WITHAFTER-CATALYSTLAMBDA PROBE.※公道走行不可。※取扱説明書が付属する場合は、外国語となります。※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。※画像には他の商品が含まれている場合があります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※受注後のキャンセル、返品、都合交換はできません。予めご了承ください。 ※画像はイメージです。■適合車種690 ENDURO R 690 ENDURO R 年式: 21-24690 SMC R 690 SMC R 年式: 21-24

MIVVミヴ スリップオンマフラー STR-1 ブラックステンレス スリップオンマフラーMIVV ミヴ STR-1 ブラックステンレス スリップオンマフラー 690 ENDURO R SMC KTM マフラー

■詳細説明Built with the best possible layout to fit the available spacesonthe bike，the mivv STR-1 exhaust has been designed to ensurebestperformances，reliability and weight reduction.The exhaust is made of AISI 304 stainless steel，features a 3ktwillcarbon cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine canexpressits best over the entire range of engine revs.The bench tests also confirmed by track tests showexcellentperformance at both low and high revs.The STR-1 exhaust is equipped with latest generationsound-absorbingmaterials，developed by our R＆D department，andcomplies with theincreasingly stringent noise limits imposed bynational andinternational regulations for off-roadcompetitions.The sound-absorbing material is easily replaceable thanks toscrewslocated in the front part of the exhaust that facilitatethisoperation.The Mivv STR-1 exhaust does not require remapping and wasdevelopedwithout making any changes to the electronics.It is interchangeable with the stock silencer.■注意点※EURO 5APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLED.※NOT COMPATIBLE WITH EURO5＋ VEHICLES EQUIPPED WITHAFTER-CATALYSTLAMBDA PROBE.※公道走行不可。※取扱説明書が付属する場合は、外国語となります。※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。※画像には他の商品が含まれている場合があります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※受注後のキャンセル、返品、都合交換はできません。予めご了承ください。 ※画像はイメージです。■適合車種690 ENDURO R 690 ENDURO R 年式: 21-24690 SMC R 690 SMC R 年式: 21-24

MIVVミヴ スリップオンマフラー STR-1 スリップオンマフラーMIVV ミヴ STR-1 スリップオンマフラー 701 ENDURO SUPERMOTO HUSQVARNA ハスクバーナ マフラー

■商品概要仕様：スリップオン取り付けポジション：純正同様■詳細説明Built with the best possible layout to fit the available spacesonthe bike，the mivv STR-1 exhaust has been designed to ensurebestperformances，reliability and weight reduction.Color：TITANIUMThe exhaust is made of grade 1 Titanium，features a 3k twillcarbonend cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance..Color：STAINLESS STEEL、BLACK STAINLESS STEELThe exhaust is made of AISI 304 stainless steel，features a 3ktwillcarbon cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine canexpressits best over the entire range of engine revs.The bench tests also confirmed by track tests showexcellentperformance at both low and high revs.The STR-1 exhaust is equipped with latest generationsound-absorbingmaterials，developed by our R＆D department，andcomplies with theincreasingly stringent noise limits imposed bynational andinternational regulations for off-roadcompetitions.The sound-absorbing material is easily replaceable thanks toscrewslocated in the front part of the exhaust that facilitatethisoperation.The Mivv STR-1 exhaust does not require remapping and wasdevelopedwithout making any changes to the electronics.It is interchangeable with the stock silencer.■注意点※EURO 5 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLED.NOTCOMPATIBLE WITH EURO5+ VEHICLES EQUIPPED WITH AFTER-CATALYSTLAMBDAPROBE.※公道走行不可。※取扱説明書が付属する場合は、外国語となります。※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。※画像には他の商品が含まれている場合があります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。【JMCA未認証】※JMCA未認証のマフラーは車検・公道走行に適さない場合がございます。 ※受注後のキャンセル、返品、都合交換はできません。予めご了承ください。■適合車種701 ENDURO 701 ENDURO 年式: 21-24701 SUPERMOTO 701 SUPERMOTO 年式: 21-24

MIVVミヴ スリップオンマフラー STR-1 スリップオンマフラーMIVV ミヴ STR-1 スリップオンマフラー 690 SMC R ENDURO KTM マフラー

■商品概要仕様：スリップオン取り付けポジション：純正同様■詳細説明Built with the best possible layout to fit the available spacesonthe bike，the mivv STR-1 exhaust has been designed to ensurebestperformances，reliability and weight reduction.The exhaust is made of AISI 304 stainless steel，features a 3ktwillcarbon cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine canexpressits best over the entire range of engine revs.The bench tests also confirmed by track tests showexcellentperformance at both low and high revs.The STR-1 exhaust is equipped with latest generationsound-absorbingmaterials，developed by our R＆D department，andcomplies with theincreasingly stringent noise limits imposed bynational andinternational regulations for off-roadcompetitions.The sound-absorbing material is easily replaceable thanks toscrewslocated in the front part of the exhaust that facilitatethisoperation.The Mivv STR-1 exhaust does not require remapping and wasdevelopedwithout making any changes to the electronics.It is interchangeable with the stock silencer.■注意点※EURO 4 APPROVED ONLY WHEN ACC.041.A1 CATALYST IS INSTALLED※公道走行不可。※取扱説明書が付属する場合は、外国語となります。※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。※画像には他の商品が含まれている場合があります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。【JMCA未認証】※JMCA未認証のマフラーは車検・公道走行に適さない場合がございます。 ※受注後のキャンセル、返品、都合交換はできません。予めご了承ください。■適合車種690 SMC R 690 SMC R 年式: 19-20690 ENDURO R 690 ENDURO R 年式: 19-20

MIVVミヴ スリップオンマフラー STR-1 スリップオンマフラーMIVV ミヴ STR-1 スリップオンマフラー CRF 250 R HONDA ホンダ マフラー

■商品概要仕様：スリップオン取り付けポジション：純正同様■詳細説明Built with the best possible layout to fit the available spacesonthe bike，the mivv STR-1 exhaust has been designed to ensurebestperformances，reliability and weight reduction.Color：TITANIUMThe exhaust is made of grade 1 Titanium，features a 3k twillcarbonend cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance.Color：STAINLESS STEELThe exhaust is made of AISI 304 stainless steel，features a 3ktwillcarbon cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine canexpressits best over the entire range of engine revs.The bench tests also confirmed by track tests showexcellentperformance at both low and high revs.The STR-1 exhaust is equipped with latest generationsound-absorbingmaterials，developed by our R＆D department，andcomplies with theincreasingly stringent noise limits imposed bynational andinternational regulations for off-roadcompetitions.The sound-absorbing material is easily replaceable thanks toscrewslocated in the front part of the exhaust that facilitatethisoperation.The Mivv STR-1 exhaust does not require remapping and wasdevelopedwithout making any changes to the electronics.It is interchangeable with the stock silencer.This product is suitable for use on track and closedcoursesonly.It has been designed to fit a standard-equipped motorcycleasdelivered by the parent company.■注意点※The bench test values refer to the silencer + racingheaderconfiguration. Noise level： 114 db※公道走行不可。※取扱説明書が付属する場合は、外国語となります。※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。※画像には他の商品が含まれている場合があります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。【JMCA未認証】※JMCA未認証のマフラーは車検・公道走行に適さない場合がございます。 ※受注後のキャンセル、返品、都合交換はできません。予めご了承ください。■適合車種CRF 250 R CRF 250 R 年式: 22-24

MIVVミヴ スリップオンマフラー STR-1 スリップオンマフラーMIVV ミヴ STR-1 スリップオンマフラー CRF 450 R HONDA ホンダ マフラー

■商品概要仕様：スリップオン取り付けポジション：純正同様■詳細説明Built with the best possible layout to fit the available spacesonthe bike，the mivv STR-1 exhaust has been designed to ensurebestperformances，reliability and weight reduction.Color：TITANIUMfeatures a 3k twill carbon end cap and is equipped with aspecialDB-Killer optimized to reduce noise withoutpenalizingperformance.Color：STAINLESS STEELThe exhaust is made of AISI 304 stainless steel，features a 3ktwillcarbon cap and is equipped with a special DB-Killer optimizedtoreduce noise without penalizing performance.The STR-1 exhaust has been designed so that the engine canexpressits best over the entire range of engine revs.The bench tests also confirmed by track tests showexcellentperformance at both low and high revs.The STR-1 exhaust is equipped with latest generationsound-absorbingmaterials，developed by our R＆D department，andcomplies with theincreasingly stringent noise limits imposed bynational andinternational regulations for off-roadcompetitions.The sound-absorbing material is easily replaceable thanks toscrewslocated in the front part of the exhaust that facilitatethisoperation.The Mivv STR-1 exhaust does not require remapping and wasdevelopedwithout making any changes to the electronics.It is interchangeable with the stock silencer.This product is suitable for use on track and closedcoursesonly.It has been designed to fit a standard-equipped motorcycleasdelivered by the parent company.■注意点※The bench test values refer to the silencer + racingheaderconfiguration. Noise level： 114 db※公道走行不可。※取扱説明書が付属する場合は、外国語となります。※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。※画像には他の商品が含まれている場合があります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。【JMCA未認証】※JMCA未認証のマフラーは車検・公道走行に適さない場合がございます。 ※受注後のキャンセル、返品、都合交換はできません。予めご了承ください。■適合車種CRF 450 R CRF 450 R 年式: 21-24

JILLSジルズ スマートフォンケース スマートフォンケースJILLS ジルズ スマートフォンケース 電子機器類

■商品概要OFF LIMITS 警告看板デザインハードタイプ■詳細説明各機種専用のハードケースなので本体にぴったりフィットします。ハードケースの表面に特殊印刷を施した当店オリジナル商品です。ベースは透明なクリアケースとなります。すべての機種でサイドボタンやカメラなどの基本操作は装着したまま行えます。【対応機種】iPhoneシリーズ/iPodtouchシリーズ/XPERIAシリーズ/GALAXYシリーズ/AQUOSPHONEシリーズ/ARROWSシリーズ/ELUGAシリーズ/MEDIASシリーズ/DisneyMobileシリーズ/OPTIMUSシリーズ■注意点※ケースのみの販売となります。※卓上ホルダをご使用の際にはケースの取り外しが必要となります。※各対応機種ごとにケースの形状やカメラ穴の位置等が異なるため、機種によっては文字やデザインが一部欠けてしまう場合がありますので、予め参考画像にてご判断お願い致します。※幅広く機種対応ケースを品揃えしておりますが、一部対応不可の機種がありますので、予めご了承ください。※ご注文の際に正確な機種型をお知らせください(例：ドコモ SO-02F au SOL23 など)■適合車種   備考: 汎用

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Yoshimura / ヨシムラ USA CBR650F 14-18/Cb650F 18/Cb650R 19-20 Race R-77 Stainless Full Exhaust- W/ Stainless Muffler | 12

適合車種: HondaCB650F (2018-2018)CB650R (2019-2020)CBR650F (2014-2018)Article Code: 12651AJ520EAN: 0840025910652The 2019-20 Honda CB650R is a naked middleweight bike that is a blast both on and off the race track. We've developed a high performing 4-2-1 system that saves weight looks amazing and adds a lot of performance.Right off the bat the 4 cylinder 649cc DOHC engine responded to our R-77 Race Series Works Finish full system. In performance testing the CB650R gained substantial numbers on our dyno adding performance across the entire spectrum with a 5.9% gain in peak HP and 5.2% peak torque.This system is perfect for keeping the dB levels at acceptable limits while providing the best performance that this inline 4 demands! Weight loss was as amazing dropping over a whopping 9 Lbs.!!! Don't forget that legendary Yoshimura quality and sound - it's on. Lets head to the track!Proudly made in the USA!

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Yoshimura / ヨシムラ USA CBR650F 14-18/Cb650F 18/Cb650R 19-20 Race R-77 Stainless Full Exhaust- W/ Carbon Fiber Muffler |

適合車種: HondaCB650F (2018-2018)CB650R (2019-2020)CBR650F (2014-2018)Article Code: 12651AJ220EAN: 0840025910645The 2019-20 Honda CB650R is a naked middleweight bike that is a blast both on and off the race track. We've developed a high performing 4-2-1 system that saves weight looks amazing and adds a lot of performance.Right off the bat the 4 cylinder 649cc DOHC engine responded to our R-77 Race Series Works Finish full system. In performance testing the CB650R gained substantial numbers on our dyno adding performance across the entire spectrum with a 5.9% gain in peak HP and 5.2% peak torque.This system is perfect for keeping the dB levels at acceptable limits while providing the best performance that this inline?four demands! Weight loss was as amazing dropping over a whopping 9 Lbs.!!! Don't forget that legendary Yoshimura quality and sound - it's on. Lets head to the track!Proudly made in the USA!

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Yoshimura / ヨシムラ USA CB300R 19-21 Race R-77 Stainless Slip-On Exhaust- W/ Stainless Muffler | 12310BJ520

適合車種: HondaCB300R (2019-2021)Article Code: 12310BJ520EAN: 0840025910188The 2019-20 Honda CB300R is a naked entry level bike that has the foundation to be a fun track day bike so we thought let's make the track days better for this 286cc single cylinder bike.Right off the bat the engine responded to our R-77 Race Series Works Finish full systems and slip-ons are perfect for keeping the dB levels at acceptable limits while providing the the great performance that the little Honda craves.In performance testing the CB300R gained substantial numbers on our dyno adding performance across the entire spectrum with a 4.2% gain in peak HP and 3.0% peak torque. Lets head to the track!Proudly made in the USA!Stock muffler: 12.4 Lbs vs Yoshimura?R-77?muffler weight:?6.2 Lbs

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Yoshimura / ヨシムラ USA CB300R 19-21 Race R-77 Stainless Full Exhaust- W/ Stainless Muffler | 12310AJ520

適合車種: HondaCB300R (2019-2021)Article Code: 12310AJ520EAN: 0840025910164The Honda CB300R is a naked entry level bike that has the foundation to be a fun track day bike so we thought let's make the track days better for this 286cc single cylinder bike.Right off the bat the engine responded to our R-77 Race Series Works Finish full systems and slip-ons are perfect for keeping the dB levels at acceptable limits while providing the the great performance that the little Honda craves.In performance testing the CB300R gained substantial numbers on our dyno adding performance across the entire spectrum with a 4.2% gain in peak HP and 3.0% peak torque. Lets head to the track!Proudly made in the USA!Stock full system: 15.6 Lbs vs?Yoshimura R-77 Full System weight: 8.1?Lbs

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Yoshimura / ヨシムラ USA CB300R 19-21 Race R-77 Stainless Slip-On Exhaust- W/ Carbon Fiber Muffler | 12310BJ220

適合車種: HondaCB300R (2019-2021)Article Code: 12310BJ220EAN: 0840025910171The 2019-20 Honda CB300R is a naked entry level bike that has the foundation to be a fun track day bike so we thought let's make the track days better for this 286cc single cylinder bike.Right off the bat the engine responded to our R-77 Race Series Works Finish full systems and slip-ons are perfect for keeping the dB levels at acceptable limits while providing the the great performance that the little Honda craves.In performance testing the CB300R gained substantial numbers on our dyno adding performance across the entire spectrum with a 4.2% gain in peak HP and 3.0% peak torque. Lets head to the track!Proudly made in the USA!Stock muffler: 12.4 Lbs vs Yoshimura?R-77?muffler weight:?5.6 Lbs

【正規品/新品】人気のバイク用品・カスタムパーツがお買得！Yoshimura / ヨシムラ USA CB300R 19-21 Race R-77 Stainless Full Exhaust- W/ Carbon Fiber Muffler | 12310AJ220

適合車種: HondaCB300R (2019-2021)Article Code: 12310AJ220EAN: 0840025910157The 2019-20 Honda CB300R is a naked entry level bike that has the foundation to be a fun track day bike so we thought let's make the track days better for this 286cc single cylinder bike.Right off the bat the engine responded to our R-77 Race Series Works Finish full systems and slip-ons are perfect for keeping the dB levels at acceptable limits while providing the the great performance that the little Honda craves.In performance testing the CB300R gained substantial numbers on our dyno adding performance across the entire spectrum with a 4.2% gain in peak HP and 3.0% peak torque. Lets head to the track!Proudly made in the USA!Stock full system: 15.6 Lbs vs Yoshimura?R-77 Full System?weight:?7.8?Lbs